Eurotiles Superior Tile Grout is a designer's joint tile filler developed to complement Eurotiles Superior Ceramic Tile's aesthetic quality. It is used to fill the joint between laid ceramic tiles.
• Water-repellent
• Non-shrink, non-sag
• High impact resistance
• Crack-free, no powdery mess
• Molds and mildew resistance
• Easy to mix and apply
1. Before use, see to it that the laid ceramic tiles have set overnight and the area to be filled with grout is clean. Remember, approximately 2kgs of grout can fix a maximum of four (4) square meters of ceramic tiles.
2. Pour EUROTILES SUPERIOR TILE GROUT powder into a clean plastic container. Slowly add water, stirring continually until thick paste. Allow to stand for 10 minutes. Stir again and use within an hour. For 5kgs of grout, add about 1.4 liters of water; for 2 kgs add about 1/2 liter. Do not use salty water.
3. Apply EUROTILES SUPERIOR TILE GROUT by spreading the thick paste mixture diagonally accross the tile joints, applying enough pressure, and eliminating trapped air. Rub the exposed surface to make even. Let stand for five (5) minutes.
4. Wipe off excess grout with a damp sponge or clean cloth using the same diagonal strokes until the grout is completely leveled with the tiles.
5. Wring out as much water as possible from the clean sponge or cloth and tool the filled joints by slightly running the sponge along the tile grout lines.
6. Smooth the grout with a clean, soft and dry cloth, wiping off any remaining dry residue.
7. Protect the grouted areas by placing barriers or coverings for at least 24 hours before resuming normal traffic.